Monitor

Usage

snyk monitor [<OPTIONS>]

Description

The snyk monitor command creates a project in your Snyk account to be continuously monitored for open-source vulnerabilities and license issues, sending the results to snyk.io

Use the monitor command command before integrating a project into production, to take a snapshot of the code to be monitored in order to avoid pushing vulnerabilities into production. Choose a test frequency in your Settings if you want to change the frequency from the default, which is daily.

A PR check will also do a test.

After running the snyk monitor command, log in to the Snyk website and view your projects to see the monitor.

If you make changes to your code, you must run the monitor command again.

For Snyk Container, see snyk container help

The monitor command is not supported for Snyk Code.

For Snyk Infrastructure as Code follow the instructions in "Regularly testing IaC files" on Snyk CLI for IaC

Exit codes

Possible exit codes and their meaning:

0: success, snapshot created 2: failure, try to re-run the command. Use -d to output the debug logs. 3: failure, no supported projects detected

Configure the Snyk CLI

You can use environment variables to configure the Snyk CLI and set variables for connecting with the Snyk API. See Configure the Snyk CLI

Code execution warning

Before scanning your code, review the Code execution warning for Snyk CLI

Debug

Use the -d option to output the debug logs.

Options

See also subsequent sections for options for specific build environments, package managers, languages and [<CONTEXT-SPECIFIC OPTIONS>] which you specify last.

--all-projects

Auto-detect all projects in the working directory, including Yarn workspaces.

For more information see the article Does the Snyk CLI support monorepos or multiple manifest files?

--fail-fast

Use with --all-projects to cause scans to be interrupted when errors occur and to report these errors back to the user.

The exit code is 2 and the scan ends. No vulnerability information is reported for projects that did not produce errors.

To perform the scan, resolve the error and scan again.

Note: If you do not use --fail-fast, Snyk scans all the projects but does not report any vulnerabilities for projects it could not scan due to misconfiguration or another error.

--detection-depth=<DEPTH>

Use with --all-projects or --yarn-workspaces to indicate how many subdirectories to search. DEPTH must be a number, 1 or greater; zero (0) is the current directory.

Default: no limit.

Example: --detection-depth=3 limits search to the specified directory (or the current directory if no <PATH> is specified) plus three levels of subdirectories; zero (0) is the current directory.

--exclude=<NAME>[,<NAME>]...>

Can be used with --all-projects and --yarn-workspaces to indicate directory names and file names to exclude. Must be comma-separated, and cannot include a path.

Example: $ snyk test --all-projects --exclude=dir1,file2

This will exclude any directories and files named dir1 and file2 when scanning for project manifest files such as: ./dir1, ./src/dir1, ./file2, ./src/file2 and so on.

Note: --exclude=dir1 will find both ./dir1, and ./src/dir1. However, --exclude=./src/dir1 will result in an error because it includes a path.

--prune-repeated-subdependencies, -p

Prune dependency trees, removing duplicate sub-dependencies.

Continues to find all vulnerabilities, but may not find all of the vulnerable paths.

Use this option if any big projects fail to be tested.

Default: false

--print-deps

Print the dependency tree before sending it for analysis.

--remote-repo-url=<URL>

Set or override the remote URL for the repository that you would like to monitor.

Groups all Projects found under a single Target.

--dev

Include development-only dependencies. Applicable only for some package managers, for example, devDependencies in npm or :development dependencies in Gemfile.

Note: This option can be used with Maven, npm, and Yarn projects.

Default: false, scan only production dependencies.

--org=<ORG_ID>

Specify the <ORG_ID> to run Snyk commands tied to a specific Snyk Organization. The <ORG_ID> influences some features availability and private test limits.

If you have multiple Organizations, you can set a default from the CLI using:

$ snyk config set org=<ORG_ID>

Set a default to ensure all newly monitored projects are created under your default Organization. If you need to override the default, use the --org=<ORG_ID> option.

Default: <ORG_ID> that is the current preferred Organization in your Account settings

Note: You can also use --org=<orgslugname>. The ORG_ID works in both the CLI and the API. The Organization slug name works in the CLI, but not in the API.

orgslugname must match the slug name as displayed in the URL of your org in the Snyk UI: https://app.snyk.io/org/[orgslugname]. The orgname does not work.

For more information see the article How to select the Organization to use in the CLI

--file=<FILE>

Specify a package file.

When testing locally or monitoring a project, you can specify the file that Snyk should inspect for package information. When the file is not specified, Snyk tries to detect the appropriate file for your project.

See also the section on Options for Python projects

--package-manager=<PACKAGE_MANAGER_NAME>

Specify the name of the package manager when the filename specified with the --file=<FILE> option is not standard. This allows Snyk to find the file.

Example: $ snyk monitor --file=req.txt --package-manager=pip

For more information see Options for Python projects

--unmanaged

For C++ only, scan all files for known open source dependencies.

For options you can use with --unmanaged see Options for scanning using --unmanaged

--ignore-policy

Ignore all set policies, the current policy in the .snyk file, org level ignores, and the project policy on snyk.io.

--trust-policies

Apply and use ignore rules from the Snyk policies in your dependencies; otherwise ignore rules in the dependencies are only shown as a suggestion.

--project-name=<PROJECT_NAME>

Specify a custom Snyk project name.

Example: $ snyk monitor --project-name=my-project

--target-reference=<TARGET_REFERENCE>

Specify a reference that differentiates this project, for example, a branch name or version. Projects having the same reference can be grouped based on that reference. Supported for Snyk Open Source and use with --unmanaged.

For more information see Group projects by branch or version for monitoring

--policy-path=<PATH_TO_POLICY_FILE>

Manually pass a path to a .snyk policy file.

--json

Print results on the console as a JSON data structure.

Note: If you use an option that sets project attributes and your role lacks permission to edit project attributes the monitor command fails. For instructions on how to proceed see Permissions (role) required to edit Project attributes from the Snyk CLI

--project-environment=<ENVIRONMENT>[,<ENVIRONMENT>]...>

Set the project environment project attribute to one or more values (comma-separated). To clear the project environment set --project-environment=

Allowed values: frontend, backend, internal, external, mobile, saas, onprem, hosted, distributed

For more information see Project attributes

--project-lifecycle=<LIFECYCLE>[,<LIFECYCLE>]...>

Set the project lifecycle project attribute to one or more values (comma-separated). To clear the project lifecycle set --project-lifecycle=

Allowed values: production, development, sandbox

For more information see Project attributes

--project-business-criticality=<BUSINESS_CRITICALITY>[,<BUSINESS_CRITICALITY>]...>

Set the project business criticality project attribute to one or more values (comma-separated). To clear the project business criticality set --project-business-criticality=

Allowed values: critical, high, medium, low

For more information see Project attributes

--project-tags=<TAG>[,<TAG>]...>

Set the project tags to one or more values (comma-separated key value pairs with an "=" separator).

Example, --project-tags=department=finance,team=alpha

To clear the project tags set --project-tags=

For more information including allowable characters see Project tags

--tags=<TAG>[,<TAG>]...>

This is an alias for --project-tags

Options for Maven projects

Note: The --dev option can be used with Maven projects. See also the --dev option help

--maven-aggregate-project

Use --maven-aggregate-project instead of --all-projects when scanning Maven aggregate projects, that is, projects that use modules and inheritance.

Using --maven-aggregate-project instructs Snyk to perform a compilation step to ensure all modules within the project are resolvable by the Maven reactor. This ensures a comprehensive scan that includes dependencies of all sub-modules.

Be sure to run the scan in the same directory as the root pom.xml file.

Snyk reports the test results per individual pom.xml file within the aggregate project.

Note: You can use --all-projects when scanning Maven aggregate projects, but you cannot use --all-projects with --maven-aggregate-project.

--scan-unmanaged

To monitor individual JAR, WAR, and AAR files, use the following:

--scan-unmanaged --file=<JAR_FILE_NAME>

--scan-all-unmanaged

Auto-detect Maven, JAR, WAR, and AAR files recursively from the current folder.

--scan-all-unmanaged 

Note: Custom-built JAR files, even with open-source dependencies, are not supported.

Options for Gradle projects

--sub-project=<NAME>, --gradle-sub-project=<NAME>

For Gradle multi project configurations, monitor a specific sub-project.

--all-sub-projects

For multi project configurations, monitor all sub-projects.

Both a build.gradle file and a settings.gradle file, or equivalent files, based on the package manager, must exist in the current directory.

--all-projects

See also the --all-projects option information in the Options section of this help.

Use for monorepos. This detects all supported manifests.

For Gradle monorepos Snyk looks only for root level build.gradle / build.gradle.kts files and applies the same logic as --all-sub-projects behind the scenes.

This option is designed to be run in the root of your monorepo.

For more details, see the following support article: Scanning Gradle projects in CLI with --exclude option does not exclude sub-projects

--configuration-matching=<CONFIGURATION_REGEX>

Resolve dependencies using the first configuration that matches the specified Java regular expression.

Example: ^releaseRuntimeClasspath$

--configuration-attributes=<ATTRIBUTE>[,<ATTRIBUTE>]...

Select certain values of configuration attributes to install dependencies and perform dependency resolution.

Example: buildtype:release,usage:java-runtime

--init-script=<FILE

Use for projects that contain a Gradle initialization script.

Options for NuGet projects

--assets-project-name

When you are monitoring a .NET project using NuGet PackageReference uses the project name in project.assets.json if found.

--packages-folder

Specify a custom path to the packages folder.

--project-name-prefix=<PREFIX_STRING>

When monitoring a .NET project, use this option to add a custom prefix to the name of files inside a project along with any desired separators.

Example: snyk monitor --file=my-project.sln --project-name-prefix=my-group/

This is useful when you have multiple projects with the same name in other .sln files.

Options for .NET projects

--dotnet-runtime-resolution

Note: This option in in Early Access and may change until it is released.

Required. You must use this option when you test .NET projects using Runtime Resolution Scanning

Example: snyk test --dotnet-runtime-resolution

--dotnet-target-framework

Note: This option in in Early Access and may change until it is released.

Optional. You may use this option if your solution contains multiple <TargetFramework> directives. If you do not specify the option --dotnet-target-framework, all supported Target Frameworks will be scanned.

The Target Framework specified with this option should be defined following the standard naming convention

Example: snyk test --dotnet-runtime-resolution --dotnet-target-framework=net6.0

Options for npm projects

Note: You can use the following options with npm projects:

--dev. See the --dev option help

--all-projects to scan and detect npm projects and all other projects in the directory. See the --all-projects option help

--prune-repeated-subdependencies, -p. See the --prune-repeated subdependencies option help

--strict-out-of-sync=true|false

Control monitoring out-of-sync lockfiles.

Default: true

Options for pnpm projects

Snyk CLI pnpm support is in Early Access. To enable it, in your Snyk account navigate to Settings, select Snyk Preview, and install CLI v1.1293.0 or above.

Note: You can use the following options with pnpm projects:

--dev. See the --dev option help

--all-projects to scan and detect pnpm projects and all other projects in the directory. See the --all-projects option help

--prune-repeated-subdependencies, -p. See the --prune-repeated subdependencies option help

--strict-out-of-sync=true|false

Control monitoring out-of-sync lockfiles.

Default: true

Options for Yarn projects

Note: You can use the following options with Yarn projects:

--dev. See the --dev option help

--prune-repeated-subdependencies, -p. See the --prune-repeated subdependencies option help

--strict-out-of-sync=true|false

Control monitoring out-of-sync lockfiles.

Default: true

--yarn-workspaces

Detect and scan only Yarn Workspaces when a lockfile is in the root.

You can specify how many sub-directories to search using --detection-depth.

You can exclude directories and files using --exclude.

Default:--all-projects automatically detects and scans Yarn Workspaces.with other projects.

Option for CocoaPods projects

--strict-out-of-sync=true|false

Control monitoring out-of-sync lockfiles.

Default: false

Options for Python projects

--command=<COMMAND>

Indicate which specific Python commands to use based on the Python version.

Snyk uses Python in order to scan and find your dependencies. If you are using multiple Python versions, use this parameter to specify the correct Python command for execution.

Default: python This executes your default python version. Run python -V to find out what your default version is.

Example: snyk monitor --command=python3

--skip-unresolved=true|false

Skip packages that cannot be found in the environment, for example, private packages that cannot be accessed from the machine running the scan.

--file=<FILE_for_Python>

For a Python project, specify a particular file to monitor.

Default: Snyk scans the requirements.txt file at the top level of the project.

Important: When specifying a value for the --file parameter that is not the default file, you must also include the --package-manager=pip option. The test will fail without this parameter.

Always specify this parameter with the value pip when using a custom --file value. For example:

snyk test --file=requirements-dev.txt --package-manager=pip

This allows Snyk to correctly recognize and scan your specified manifest file, such as when you have renamed it to requirements-dev.txt.

--package-manager=pip

Add--package-manager=pip to your command if the file name is not requirements.txt.

This option is mandatory if you specify a value for the --file parameter that is not to a requirements.txt file. The test fails without this parameter. Specify this parameter with the value pip.

For complete information about the command see --package-manager=<PACKAGE_MANAGER_NAME>``

Options for scanning using --unmanaged

The following snyk monitor options can be used with --unmanaged as documented in this help.

--org=<ORG_ID>

--json

--remote-repo-url=<URL>

--target-reference=<TARGET_REFERENCE>

--project-name=<c-project>

There are also special options.

--max-depth

Specify the maximum level of archive extraction.

Usage: --max-depth=1

Use 0 (zero, the default) to disable archive extraction completely.

--print-dep-paths

Display dependencies.

Use this option to see what files contributed to each dependency identified.

To see how confident Snyk is about the identified dependency and its version, use the --print-deps or --print-dep-paths option.

Options for build tools

-- [<CONTEXT-SPECIFIC_OPTIONS>]

Use a double dash (--) after the complete Snyk command to pass options (arguments, flags) that follow directly to the build tool, for example Gradle or Maven.

The format is snyk <command> -- [<context-specific_options>]

Example: snyk monitor -- --build-cache

Note: Do not use double quotes in any -- [<context-specific_options>].

Example: Use snyk monitor --org=myorg -- -s settings.xml NOT snyk monitor --org=myorg -- "-s settings.xml"